To use the Scan To Computer function, you need the following settings depending on your OS and connection method.
Before Using Scan To Computer with Image Capture (Mac OS X) Set the machine for using Scan To Computer. Refer to the following. Setting for Using Network TWAIN (Network Connection) Install the Mac OS X scanner driver. Installing a Driver and Software to a Computer For the USB connection, proceed. Look in your Documents folder and see if you can find a folder called.Scanner Output. Also look for a folder that includes HPor Hewlett. Failing this, perform one additional scan. Then click on the Spotlight icon in the top right corner of your screen. Learn how to scan and edit documents and photos from your HP printer to your Mac computer. Learn more about scanning on your Mac OS X computer on our support. Before Using Scan To Computer. The procedure depends on the operation system of your computer and connection method. On the Windows computer, Scan To Computer function can be used with ActKey or WSD Scan. See the following: Using ActKey (Windows) Using WCD Scan. If you use Mac OS X, you can use Image Capture. See the following: Using Image.
On the Windows computer, Scan To Computer function can be used with ActKey or WSD Scan.
Turn On Scan To Computer
If you use Mac OS X, you can use Image Capture.
Note
To connect the machine to a network, set the following.
Set the [TCP/IP] setting of the machine to [Enable].
Match the IP version between the machine and a computer.
Set the DNS server.
Memo
You cannot send an image to multiple computers at the same time with this function.
The required software varies depending on the OS of your computer and the function to use. Install the appropriate software.
Before Using Scan To Computer with ActKey
Set the machine for using Scan To Computer.
Refer to the following.
Setting for Using Network TWAIN (Network Connection)
Install the scanner driver and ActKey.
If you use the network connection, perform the following steps.
Register a destination computer that is used for Scan To Computer in the machine.
Memo
Your computer may automatically be registered when the scanner driver is installed.
If the computer information, such as computer name or IP address is changed, you need to newly register the information.
Start Network Configuration.
Click [Start], and then select [All Programs] > [Okidata] > [ActKey] > [Tool] > [Network Configuration].
Once installed, it automatically starts when you log on.
Before Using Scan To Computer with WSD Scan
Set the machine for using WSD Scan on the machine.
Install this machine as a WSD device to a connected computer.
For details, see 'Before Using WSD Scan'.
When the machine is installed in the computer, the computer is also registered to the machine as a destination computer for WSD Scan.
Before Using Scan To Computer with Image Capture (Mac OS X)
If you use Mac OS X, you can use Image Capture.
Set the machine for using Scan To Computer.
Refer to the following.
Rar convert mac. Setting for Using Network TWAIN (Network Connection)
Install the Mac OS X scanner driver.
For the USB connection, proceed to step 4.
Register a destination computer that is used for Scan To Computer in the machine. (For the network connection)
Memo
If the computer information, such as computer name or IP address is changed, you need to newly register the information.
Start Image Capture, and then select this machine from the list on the left side of Image Capture.
Setting to Use Network TWAIN
Scan Documents To Mac Computer
Enable the Network TWAIN function so that you can use the Scan to Computer function on a computer that is connected via a network.
Enable Scan To Computer Windows 10
Press or several times, and press [Admin Setup].
Enter the administrator name and password and press [OK].
The factory default administrator name and password are 'admin' and 'aaaaaa' respectively.
Press [TWAIN Setup].
Make sure that [Network TWAIN] is set to [ON].
Memo
Pressing [Network TWAIN] switches between [ON] and [OFF].
